Paper Title :Invitro Study Of Ti-6al-4v Alloy Coated With Tio2 By Physical Vapour Deposition (E-Beam) Method And Hap By RF Sputtering Method For Orthopaedic Application
Author :Mythilli B, Radhika N, Jibin C Vincent, Vivekananthan B, Gnanavel S
Article Citation :Mythilli B ,Radhika N ,Jibin C Vincent ,Vivekananthan B ,Gnanavel S ,
(2016 ) " Invitro Study Of Ti-6al-4v Alloy Coated With Tio2 By Physical Vapour Deposition (E-Beam) Method And Hap By RF Sputtering Method For Orthopaedic Application " ,
International Journal of Advances in Science, Engineering and Technology(IJASEAT) ,
pp. 140-142,
Volume-4,Issue-3
Abstract : Ti-6Al-4V is the most widely used alloy for orthopaedic and dental applications, because of its excellent
strength and corrosion resistance. Hydroxyapatite (HAp) is a nanoceramics which gives better osseo integration. TiO2 is an
antibiotic, which shows antimicrobial properties. The aim of the study is mainly focus on double layer coating of TiO2 and
nano ceramics HAp by PVD(E-Beam Evaporation) and RF Sputtering methods. TiO2 and HAp coated alloy was
characterized by SEM, EDS, FTIR, XRD and also Hardness test by Vicker’s Micro Hardness test. The invitro study of the
TiO2 and HAp coated alloy was carried out by using Hank’s solution. After invitro study, TiO2 gives better bonding strength
and the amount of calcium phosphate raises, which gives better osseo integration that is suitable for orthopaedic implants.
Keywords— Tialloy(Ti-6Al-4V), Physical Vapour Deposition, Sputtering, Rutile Tio2 nano particle, Hydroxyapatite.
Type : Research paper
Published : Volume-4,Issue-3
DOIONLINE NO - IJASEAT-IRAJ-DOIONLINE-5188
View Here
Copyright: © Institute of Research and Journals
|
|
| |
|
PDF |
| |
Viewed - 49 |
| |
Published on 2016-08-17 |
|